L-Band Power Amplifier (Model 1311A)
The 1311A Power Amplifier is a class C, four stage pulsed Power Amplifier, covering the frequency range 1.2 - 1.4 GHz.
The ODU Power Amplifier is a 12W class A 2 stage linear amplifier which is used for the uplink of outdoor units at the frequency range of 4.4 - 5.0 GHz . The amplifier features a Power Amplitude Detection Module which enables the ALC function.
The VHF RF Matrix is a radio simulator which operates in a VHF frequency range and has 10 RF input/output ports which are connected to the VHF radio equipment. For each RF input /output port, the unit delivers a different RF signal.
The IFF module is a unique L-Band Switch Matrix and Up/Down converter used for Up and Down converting of RF received and transmitted signals.
[Please contact us for more information]
The Channel Selector is a unique L-Band Switch Matrix used for routing RF signals to and from a central unit. The module exhibits a high level of isolation and low RF path loss.
[Please contact us for more information]
SP3T is a PIN diode high-power waveguide switch used for routing airborne RF antenna transmit/receive signals. The switch combines low loss and high isolation performance with an integral TTL driver in one compact package.
The Calbox is used for routing calibration signals to the injection coupler built into the SGP antenna as well as to remote test poles. The calibration interfaces the CU for both RF and control signals.
Please contact us for more information.
The Transponder is used to receive and transmit radar signals. The unit is comprised of Receiver and Repeater channels and is specially designed for rugged field conditions.
